Menu
Cart 0
57042 - Trail Rocker System Jeep Wrangler TJ 1997-06 (w/o Switches)

57042 - Trail Rocker System Jeep Wrangler TJ 1997-06 (w/o Switches)

  • $366.99


 

Wire up your own switches with the Trail Rocker Relay Center from Painless, allowing you to control up to eight accessories on your TJ Jeep! This kit uses the same relay center found in our other Trail Rocker systems. However, it comes without the switch panel allowing you to wire up your own switches.

The heart of this kit is enclosed in the weatherproof housing that surrounds the relay center with eight fuses and relays. This kit provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories ranging from lights to air lockers. Easily installed with our detailed instructions and plug-n-play design.

  • Control up to 8 accessories, (8) 30 amp fuses and (8) 30 amp relays
  • Weatherproof housing around the power center and connections
  • Custom bolt-on powder coated bracket for the power center
  • Includes all the of the required wiring

Winch Ready! The Trail Rocker system includes dedicated wires for controlling a winch. Purchase of our Winch Control Add-on Kit part number 57150 is required for operation. 

 

The top of the weatherproof fuse & relay center features the stylish logo silkscreened onto it. Along with the fused power source mounted next to it. Underneath the fuse & relay center you will find the powder coated custom mounting bracket with stainless hardware. This bracket is designed to install in existing mounting holes under the hood. 

 

The heart of the Trail Rocker is the fuse & relay center. Here you will find eight 30 amp fuses and eight 30 amp relays. 

 

The 200 Amp MIDI fuse comes pre-installed ready to protect your investment! 

The underside of the fuse & relay cover has a built in gasket to help keep any moisture out and to act as an extra support for the relays. This extra support on the relays ensures that no matter how good or bad you are on the trails, the relays will not pop out of place. 

Attention to detail shows in this bolt with O-ring combo to hold the top cover on.  

 

 

 

 

 

This harness attaches the fuse & relay center to the switches of your choice. 

 

Exiting the fuse & relay center we provide you with 21’ of wire to reach any 12 volt accessory you have.

 

Printed every 12” on the wire you’ll find the circuit description, a signature touch of ours. 

 

The parts kit comes with everything you’ll need to install the Trail Rocker, except the tools and the Jeep.

You’ll also find a custom pigtail that allows the Trail Rocker to power up only when the key is turned on. The system is shipped to be powered at all times. 

 

You'll also find a winch pigtail that is pre wired into the kit. This pigtrail is ready to wire up to your winch. The other end is ran up to the switch panel. With the purchase of our custom winch switch PN 57150. You can easily replace one of your switches and control your winch from in the cab.   

 

If you’ve never seen a Painless manual, you’re in for a treat. Scroll to the top for a PDF version of this nearly 50 page full color manual. You’ll wish we made manuals for everyday living. 

  

 

 

Customers Who Bought This Item Also Bought